Forget those re-used chemical drums or barrels for bulk feeding.
The New Emperor Feeder is a purpose-designed feeder that blends seamlessly into its environment and employs a unique silo design ensuring that feed loaded into the top always cycles fully, leaving no dead areas for feed to be trapped providing a constant flow of fresh feed for your birds.
The Emperor Feeder is light and easy to handle and is equipped with a strong, water tight lid with a robust push click fit which is the right size and height for convenient filling.
The Emperor Feeder is also designed so that the position and angle of the legs provides optimum stability.
The entire assembled unit is inherently stable as the Centre of gravity is low in relation to the leg footprint even when full. In addition, because different game species are comfortable with different feeding heights, the Emperor Feeder has legs that are easily adjusted.
As they are made of tantalized wood they can be sawn to the required length or, for smaller adjustments, the leg wedges can be fixed at different positions.
The robust and inherently stable design of the new Emperor Feeder enables it to resist both being blown over by high winds and attack from badgers and with a massive feed capacity of 70 liters/ 55kg the new Emperor Feeder does not need to be replenished too often either!
The Silo Design of the Emperor Feeder ensures that birds consume feed that is always fresh. In addition, the rainwater drainage tube diverts water away from the feed area avoiding feed contamination and can be fed into the top of a drinker providing fresh water in the field.
Complete with legs, lid, feed pan & hose for water run-off.
- Easy to put together but some self-assembly required.
- 90cm high (3') Legs are 60cm (2') holding the feed pan is 22.5cm (9") from the ground.
- 70 litres / 55kg
Manufactured from heavy Glass Filled Nylon 6, The Emperor Feeder Feed Dispenser is designed to withstand long term UV exposure and is non-corrosive.
It is anchored to the main body using 4 large anchor screws and the unique cone feed system allows for a wide variety of feed types to be dispensed without clogging.
It has 4 feeding compartments and an auto clean and drain design allowing dust to be dropped out of the feed area and rainwater to run off around the bottom edge of the rim.
The Polymer used is non reflective minimizing distress to timid birds.
PLEASE READ BEFORE YOU ORDER :
The lid is waterproof and has a tight fit
This is needed to stop the wind blowing it off and to stop water getting in
It has a click close feature .
We recommend in cold or damp weather to dust your poultry pellets in diatom before adding to your feeder.
This helps to keep the feed dry and free flowing and will not block the bottom of the feeder if moisture gets into your pellets and makes them swell.
Diatom also works as a natural poultry wormer too!
Any questions or if you would like to see a film on the feeder please email or call me any time or go to :